Publicidad
Idiomas disponibles
Idiomas disponibles
Failure to care for and monitor your product may result in the risk of serious injury.
•
Clean the rollator regularly with warm water and a soft cloth. Do not use abrasive products, detergents or solvents.
•
Dry with a clean, dry soft cloth.
•
Make sure there is no accumulation of dirt or debris around the axle, brakes or wheels.
•
Do not use cleaning products containing phenol or chlorine, as this could damage aluminium and polyamide materials.
•
Lubricate the wheels with a little oil if they squeak.
•
Periodically check the wear and strength of all screws and bolts. Replace all broken, damaged or worn parts immediately.
•
Check that the brakes are working before each use.
•
Check the parking brakes by pushing the handles into the locked position, then trying to push the rollator.
•
If there is a malfunction, do not repair the rollator yourself. Consult an authorized dealer.
•
Checklist :
To keep the rollator in good condition, check before each use, and check regularly as follows :
Check the item
Clip and knob for height adjustment
Structural weld at wheels
Cleanliness
Screws and fasteners
Stability of frame and backrest
Condition of seat
Brakes
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
your product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must be
inspected by an authorised specialist.
RECYCLING
When the product has become unusable and you have to throw it away: please contact your specialist dealer. If you wish to carry
out recycling for yourself, ask your local waste management company for disposal guidelines.
STORAGE
Failure to observe the storage conditions can lead to deterioration of the product and thus to the risk of serious injury.
•
Do not store your product for an extended period of time near a heat source or in the sun (e.g. behind a window or near a
radiator) or near a cold source.
•
Keep away from all flames and sources of sparks.
•
Respect the conditions for storing your product :
•
In a dry and temperate place
•
Protect your product from dust, corrosion (e.g. abrasive elements, sand, sea water, salty air).
•
Store all removed parts together in the same place (or locate them if necessary) to avoid mixing them with other products
when reassembling.
•
All components must be stored without any load (do not place any objects that are too heavy on the product elements, do
not jam anything...).
PERIOD OF USE
The life expectancy of this product is 5 years under normal use, safety and maintenance conditions for a user. Beyond this period,
the product can be used for as long as it is still in good condition.
If the device is used in a multi user environment (such as a nursing home or hospital) then service life may be reduced.
FEATURES TECHNICAL
DMI-F-10_Annexe 2_Notice.9
Mai 2023
Anytime
Weekly
X
X
X
X
X
Monthly
Yearly
X
X
Page 9 sur 15
Publicidad
