Publicidad
Idiomas disponibles
Idiomas disponibles
2.7.2 Removing
After each use, remove the barrier film and slowly pull the isolation sleeve
from the thin end of the handpiece
Warning: Isolation sleeves are not reusable
3 Function and operation of product
3.1 Button definition and settings
a. Turn power on
Press Main button to turn on motor handpiece.
b. Turn power off
Hold down the Setting button "P", then press Main button to turn off motor
handpiece.
c. Customized program change
Press Adjusting button "+"/"-" during standby sate.
d. Parameter setting
Press Setting button "P" to cycle through parameters, press Adjusting button
"+"/"-" to change them, then press Main button or wait 5 seconds to confirm.
e. Preset program selection
Long press Setting button "P" to enter preset program during standby state,
press Adjusting button "+"/"-" to select file system, press Setting button "P"
to entry enter file number selection, press Adjusting button "+"/"-" to select
file number, then press Main button to confirm.
f. Handpiece functions setting
With the motor handpiece turned off, hold down the Setting button "P" and
press Main button to enter handpiece functions setting, press Setting button "P"
to cycle through settings, press Adjusting button "+"/"-" to adjust, then press
Main button to confirm.
3.2 Screen display
11
Publicidad
