the life of electronic components, damage battery, reshape or melt some
plastic.
7.1.3 Avoid the storage in a too cold condition. Otherwise, when the
temperature of the equipment increases to a normal level, there will be dew
that will possibly damage PCB board.
7.2 Maintenance
7.2.1 This device does not include tools for repair, the repair should be
carried out by authorized person or authorized after-service center.
7.2.2 Keep the equipment in a dry storage condition.
7.2.3 Do not throw, beat or shock the equipment.
7.2.4 Do not smear the equipment with pigments.
7.2.5 Calibration is recommended when using a new/other contra angle or
after an extend period of operation, as the running properties can change with
usage, cleaning and sterilization.
7.2.6 Replace the battery if it seems to be running out of power sooner than it
should.
7.3 Transportation
7.3.1 Excessive impact and shake should be prevented in transportation. Lay
it carefully and lightly and don't invert it.
7.3.2 Don't put it together with dangerous goods during transportation.
7.3.3 Keep out of direct sunlight and avoid getting wet in rain and snow
during transportation.
8 Environmental protection
Please dispose according to the local laws.
9 After service
These products are designed for use in a dental offi ce and this warranty is not
applicable to other uses. The products are warranted against manufacturing
defects in materials and workmanship for the following periods:
Base, motor handpiece, power adapter: 2 years Contra-angle: one year Other
spare parts: 6 months
Brasseler USA will repair or replace products at its sole discretion.
This warranty shall be limited to replacement or repair of the products or
their parts and shall not extend to any other claims, including but not limited
to loss of profi t, cost of removal or replacement, incidental or consequential
damages or other similar claims arising from use of this product. Damage to
products resulting from acts of God, faulty installation, misuse, tampering,
33