Replacing the Ladder racks
DOP36P86DLS_DA_DG68-01105E-00_EN+MES+CFR.indb 49
1.
Put the top of the Ladder Rack back
into the two support holes in the oven
wall.
2.
Rotate the Ladder Rack towards the
oven wall.
3.
Pull up on the Position 2 rack guide,
and then press the Rack into the two
supports on the oven wall.
4.
Repeat this procedure with the Ladder
Rack on the opposite wall.
Door
Do not remove the inner gasket of the oven door for cleaning.
Inner side
•
Inner surface: Clean the inner side of the door manually using a soapy plastic
scouring pad, and then wipe with a dry cloth. Take care not to get the gasket
wet or allow moisture into the door.
•
Inner glass: The inner glass is cleaned automatically during the self-cleaning
cycle.
Outer side
•
Outer surface: Follow the cleaning instructions for the stainless steel surface in
the previous section.
•
Outer glass: Clean the outer glass using a glass cleanser or soapy water. Rinse
and dry thoroughly. Take care not to get the gasket wet or allow moisture into
the door.
Do not let moisture enter the door or
contact the door gasket (*). Moisture may
reduce the gasket's performance.
CAUTION
English 49
2020-07-06 오후 3:53:56