Descargar Imprimir esta página

SICK WTM10L Instrucciones De Uso página 41

Barreras fotoeléctricas híbridas
Ocultar thumbs Ver también para WTM10L:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 70
2.2
Qualification of personnel
2.3
Intended use
3
Product description
3.1
Product identification via the SICK product ID
9382969/2024-02-23 | SICK
Subject to change without notice
Any work on the product may only be carried out by personnel qualified and authorized
to do so.
Qualified personnel are able to perform tasks assigned to them and can independently
recognize and avoid any potential hazards. This requires, for example:
technical training
experience
knowledge of the applicable regulations and standards
The WTx10 is an opto-electronic photoelectric proximity sensor with distance value
output (referred to as "sensor" or "product" in the following) for the optical, non-contact
detection of objects. If the product is used for any other purpose or modified in any way,
any warranty claim against SICK AG shall become void.
SICK product ID
The SICK product ID uniquely identifies the product. It also serves as the address of the
web page with information on the product.
The SICK product ID comprises the host name pid.sick.com, the part number (P/N),
and the serial number (S/N), each separated by a forward slash.
The SICK product ID is displayed as text and QR code on the type label and/or on the
packaging.
Figure 2: SICK product ID
OPERATING INSTRUCTIONS
O P E R A T I N G I N S T R U C T I O N S | WTM10L
en
41

Publicidad

loading

Este manual también es adecuado para:

W10