Meny: Access
Meny: System
Min. mixer valve pump
System
Max. mixer valve pump
Bild 86-6
Parametrar i meny "System"
Meny: Sensors
Outside temperature sensor
Outside temperature correction
Bild 86-7
Parametrar i meny "Sensors"
Meny: HC config
Weather-compensated
Frost protection temperature
Building insulation
Bild 86-8
Parametrar i meny "HC config"
Meny: Heating
Heating limit, heating mode
Heating limit, reducing mode
Heating curve
Feed temperature, heating mode
Feed temperature, reducing mode
Max. feed temperature
Min. feed temperature
Room influence
Room sensor adaptation
Heating curve adaptation
Slope offset
Bild 86-9
Parametrar i meny "Heating"
Meny: Cooling
Cooling curve
Cooling parameters
Bild 86-10 Parametrar i meny "Cooling"
Meny: Special
Relay test
Screed
Program
Bild 86-11 Parametrar i meny "Special"
Daikin RoCon+ HP
Daikin Reglering RoCon+ HP
008.1444299_01 – 09/2018 – SV
Target flow cooling, start
Target flow cooling, max.
Start cooling outside temp.
Max. cooling outside temp.
Feed temperature lower limit
Feed temperature, cooling mode
Cooling setpoint correction
Screed drying
Screed program
Meny: Information
Values
Bild 86-12 Parametrar i meny "Information"
9
Blandarmodul
Average outside temperature
Mixer temperature, current
Mixer temperature, target
Mixer pump status
PWM mixer pump
Mixer valve status
Software no. B1/U1
Mixer software number
Instruktionsbok
53