Mixer Module Parameter Settings - Daikin RoCon+ HP EHSX04P30D Manual De Instrucciones

9.3

Mixer module parameter settings

Parameters Setting range
Min / Max
Min. mixer 10 - 100%
valve pump
Max. mixer 20 – 100%
valve pump
Slope offset 0 - 50 K
Mixer temper- 0 – 100 °C
ature, current
Mixer temper- 0 – 90 °C
ature, target
Mixer pump On
status
Off
PWM mixer 0 – 100%
pump
Mixer valve Neutral
status
Closed
Open
Tab. 9-2 Parameters of the mixer module
Daikin RoCon+ HP
Daikin Controller RoCon+ HP
008.1444299_01 – 09/2018 – EN
Description
[→ Main menu → System]
Minimum power of the pump in the mixer circuit.
[→ Main menu → System]
Maximum power of the pump in the mixer circuit.
[→ Main menu → Heating]
Setting of the slope offset of the feed target temperature on the Daikin
Altherma EHS(X/H) in comparison with the feed target temperature determ-
ined for the mixer circuit.
[→ Main menu → Information → Values]
Current feed temperature in the mixer circuit
[→ Main menu → Information → Values]
Current target feed temperature in the mixer circuit
[→ Main menu → Information → Values]
Current status of the mixer pump
[→ Main menu → Information → Values]
Current modulation of the mixer pump
[→ Main menu → Information → Values]
Current status of the mixer valve
The parameters available for the mixer module are largely identical
to the parameter described in Chap.
parameters available for the mixer module.
9 Mixer module
7. Tab. 9-2 lists the additional
Factory Incre- Access
setting ment
BE HF
30% 1% N E
100% 1% N E
5 K 1 K N E
- - S S
- - S S
- - S S
- - S S
- - S S
Operating Instructions
53