Publicidad
Idiomas disponibles
Idiomas disponibles
Safety
Intended use
The MIG/MAG manual welding torch is intended solely for MIG/MAG welding in
manual applications.
Any other use is deemed to be "not in accordance with the intended purpose."
The manufacturer shall not be liable for any damage resulting from such impro-
per use.
Intended use also means:
-
-
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger from electrical current.
This can result in serious personal injury and damage to property.
▶
▶
Danger from electric current due to defective system components and incor-
rect operation.
This can result in serious personal injury and damage to property.
▶
▶
Risk of coolant escaping.
This can result in serious personal injury and damage to property.
▶
30
Following all the instructions in the Operating Instructions
Carrying out all the specified inspection and maintenance work
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this equip-
ment and all system components.
WARNING!
Before starting work, switch off all devices and components involved, and
disconnect them from the grid.
Secure all devices and components involved so they cannot be switched back
on.
WARNING!
All cables, leads, and hosepacks must always be securely connected, unda-
maged, and correctly insulated.
Only use adequately dimensioned cables, leads, and hosepacks.
WARNING!
When disconnecting a welding torch from the cooling unit or other system
components, always seal the coolant hoses using the plastic seal attached to
the torch.
Publicidad
