Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING!
Danger due to hot system components and/or equipment.
This can result in serious burns or scalding.
▶
Before starting work, allow all hot system components and/or equipment to
cool to +25°C/+77°F (e.g., coolant, water-cooled system components, wire-
feeder drive motor, etc.).
▶
Wear suitable protective equipment (e.g., heat-resistant gloves, safety gog-
gles, etc.) if cooling down is not possible.
WARNING!
Danger from contact with toxic welding fumes.
Serious personal injuries may result.
▶
Always extract welding fumes.
▶
Ensure that there is a sufficient supply of fresh air. Ensure that there is a
ventilation flow rate of at least 20 m³ (169,070.1 US gi) per hour at all times.
▶
In case of doubt, the concentration of noxious substances at the work stati-
on should be assessed by a safety engineer.
CAUTION!
Danger from operation without coolant.
This can result in damage to property.
▶
Never operate water-cooled welding torches without coolant.
▶
During welding, ensure that the coolant is circulating correctly – this will be
the case for Fronius cooling units if a regular return flow of coolant can be
seen in the coolant container of the cooling unit.
▶
The manufacturer will not be liable for any damages due to non-observance
of the above mentioned points. All claims against the warranty are void.
31
Publicidad
