INFOSEC UPS SYSTEM E4 Pro One Serie Manual De Usuario página 41

Display
Backup time information
Fault information
Mute operation
Information on output and battery voltages
Load information
Operating mode information
Battery information
INFOSEC UPS SYSTEM – 15, Rue du Moulin – 44880 Sautron – France – www.infosec-ups.com Hot Line Tel : +33
(0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 11 23 AA 59 204 16
Function
Indicates the duration of autonomy in digits when the UPS is in battery
mode.
H: hours, M: minutes, S: seconds
Indicates configuration items (these configuration items are detailed in
section 3-4)."
Indicates fault codes (listed in detail in section 3-7).
Indicates that the UPS's audible alarm is deactivated.
Indicates output voltage, frequency or battery voltage.
VAC: output voltage, VDC: battery voltage, Hz: frequency
Indicates charge level: 0-25%, 26-50%, 51-75%, and 76-100%.
Indicates overload.
Indicates that the UPS is connected to the mains.
Indicates that the UPS is operating in battery mode
Indicates that battery charging is in progress.
Indicates that the UPS is in bypass mode.
Indicates that ECO mode is activated.
Indicates that the AC to DC circuit is in operation.
Indicates that the PFC circuit is operating.
Indicates that the UPS circuit is operating.
Indicates that the UPS is operating in converter mode.
Indicates that the output is powered.
Indicates battery capacity: 0-25%, 26-50%, 51-75%, and 76-100%.
Indicates low battery.
41