INFOSEC UPS SYSTEM E4 Pro One Serie Manual De Usuario página 47

Fault mode
3-7. Fault code (
Nature of defect
BUS start failure
BUS over
BUS under
BUS imbalance
UPS soft start failure
UPS voltage high
UPS voltage low
3-8. Warning indicator (
Warning
Low battery
Overload
Battery not connected
Overcharge
EPO enable
High temperature
Charger failure
Battery fault
Out of bypass voltage range
Unstable bypass frequency
Battery replacement
EEPROM error
INFOSEC UPS SYSTEM – 15, Rue du Moulin – 44880 Sautron – France – www.infosec-ups.com Hot Line Tel : +33
(0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 11 23 AA 59 204 16
When a fault has occurred, the ERROR icon and
fault code will be displayed.
Fixed icon)
Fault code
01
02
03
04
11
12
13
Icon flashing)
Icon (flashing)
Icon Nature of defect
x UPS output short
x Battery voltage too high
x Battery voltage too low
x Overheating
x Overload
x Charger failure
x
Code Alarm
Alarm signal every 2 seconds
Alarm signal every second
Alarm signal every 2 seconds
Alarm signal every 2 seconds
Alarm signal every 2 seconds
Alarm signal every 2 seconds
Alarm signal every 2 seconds
Alarm signal every 2 seconds
(At this time, UPS is off to remind users
something wrong with battery)
Alarm signal every 2 seconds
Alarm signal every 2 seconds
Alarm signal every 2 seconds
Alarm signal every 2 seconds
Fault code Icon
14 x
27 x
28 x
41 x
43
45 x
47