OVERVIEW AND OPERATION
Automatic fortification function
NOTE
When the head lock knob is changed from "ON" to "OFF", the host computer automatically enters the fortified state for 60
seconds without any operation.
In this state if the remote control lock is within the starting range, when the vibration signal is triggered, the host computer only
enters the fortified state, but do not carry out the corresponding alarm, only the function of flashing lights. If beyond the starting
range, when the vibration signal is triggered, the host only enter the fortification state,
at the same time carry out the corresponding alarm.
Smart key: Remote control
Induction remote control operation
1. Defense button
Short press, lighting once, enter the defense function.
Long press 3S to enter sensitivity adjustment, and press unlock to release
sensitivity gear setting.
2. Horn button
Short press, light three times, enter the car search function and lock
position of the vehicle.
3. Induction button
Short press once, light twice, open solenoid valve, indicator light on.
Induction off : long press 3S, direction light once
Induction on : long press 3S, direction light twice
Anti-theft function
1
Manual defense: it has light but no sound.
.
Short press the defense button (1) to enter the defense function.
Vibration alarm needs to be sensed. The sense is not within the sense
range, the alarm is not triggered within the sense range, and the alarm is
triggered if it exceeds the sense range.
The detection time is 1 second, the first flash alarm is 3S, and the second
flash alarm is 10S.
20