Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
For checking the oil level only insert the oil filler cap and do not
screw in !
Otherwise, there will be a wrong measurement in order to avoid
engine damage.
•
The oil level must be between the minimum and maximum marks.
•
Tighten the oil filler cap by hand.
Fill in with engine oil SAE10W / 40 or SJ and mark up to maximum oil level
with superior engine oil if required.
•
When change new engine oil, open the hole oil screw (2) till all engine
oil is flow out, then tighten the screw (2) and add new oil via the oil level
up to the MAX. level mark.
•
Tighten the oil filler cap (1)
CAUTION
Do not use additives. Since the oil also serves to lubricate the clutch,
do not use car engine oils supplemented with friction modifiers (such
energy-conserving oils can lead to the clutch slipping).
Use a suitable, light engine oil for scooters, such as SAE 10W/40
mineral API (SG or higher).
•
If required, replenish the engine oil (for classification and viscosity see
the next table) via the oil-filler opening up to the maximum level marking.
43
MAINTENANCE
E
Publicidad
