Replacing the air filter
NOTE
The scooter is attached with an oil foam air filter .
In case of heavy dirtiness, the paper filter element (4) has to be replaced.
Disassembly and cleaning
•
Remove the rubber cap (1), cross screws (2), so that the outer cover of
the air filter (3) and the inner cover of the air filter (5) separation.
•
Remove the paper element (4).
•
Dust out the paper filter and clean with air pressure or renewed if
necessary.
Installation
NOTE
Usually, the installation takes place in reverse order to disassembly.
CAUTION
Never run the engine without air filter.
•
Dust deposit is one of the major causes of reducing output horsepower
and increasing fuel consumption.
•
Change the air cleaner element more frequently to prolong the engine's
service life if the scooter is ride on dusty roads very often.
•
Check for properly installation of the foam housing in the filter case,
otherwise the engine runs poorly or lead to serious engine damage.
•
Be careful not to soak the air cleaner when washing the scooter,
otherwise it will cause engine hard to start.
49
MAINTENANCE
E