Publicidad
Idiomas disponibles
Idiomas disponibles
•
Measure the profile depth at the centre (2) of the tyre's tread.
Recommended minimum thread depth. = 2.0 mm.
Observe the wear marks (3).
Checking the tyre pressure
Adjust the tyre pressure according to the total weight load. Never
exceed the rated total weight or the bearing capacity of the tires.
Incorrect tyre pressure will have a considerable effect on the riding
properties of the scooter and the lifespan of the tyres.
While the tyres are cold:
•
Twist off the valve caps.
•
Check / adjust the tyre pressure.
•
Twist on the valve caps.
Tyre pressure
Only rider :
Front = 225 kPa
Rider + passenger
Front = 250 kPa
Tyre size
The standard scooter is provided with the following tyre sizes:
Front
Rear
All tyres are tubeless.
Use only tyres approved the manufacturer. The usage non-approved
tyre brands, types or sizes leads to the operating permit of the vehicle
becoming null and void. Use only pairs of tyres produced by the same
manufacturer.
47
MAINTENANCE
Rear= 225 kPa
Rear = 250 kPa
120/60-13 55P
130/60-13 53J
E
Publicidad
