Publicidad
Idiomas disponibles
Idiomas disponibles
metal, plastic, masonry or non-wood building materials.
Use of the pruning saw for operations different than
intended could result in a hazardous situation.
l)
This pruning saw is not intended for tree felling.
Use of the pruning saw for operations different than
intended could result in serious injury to the operator or
bystanders.
m) Follow all instructions when clearing jammed material,
storing or servicing the pruning saw. Make sure the
switch is off and the battery pack is removed.
Causes and operator prevention of kickback:
a) Kickback may occur when the nose or tip of the guide
bar touches an object, or when the wood closes in and
pinches the saw chain in the cut.
b) Tip contact in some cases may cause a sudden reverse
reaction, kicking the guide bar up and back towards the
operator.
c) Pinching the saw chain along the top of the guide
bar may push the guide bar rapidly back towards the
operator.
d) Either of these reactions may cause you to lose control
of the saw which could result in serious personal injury.
Do not rely exclusively upon the safety devices built into
your saw. As a pruning saw user, you should take several
steps to keep your cutting jobs free from accident or
injury.
e) Kickback is the result of pruning saw misuse and/or
incorrect operating procedures or conditions and can be
avoided by taking proper precautions as given below:
- Maintain a firm grip, with thumbs and fingers encircling
the pruning saw handles, with both hands on the saw
and position your body and arm to allow you to resist
kickback forces. Kickback forces can be controlled by
the operator, if proper precautions are taken. Do not let
go of the pruning saw.
- Do not overreach and do not cut above shoulder
height. This helps prevent unintended tip contact and
enables better control of the pruning saw in unexpected
situations.
- Only use replacement guide bars and saw chains
specified by the manufacturer. Incorrect replacement
guide bars and saw chains may cause chain breakage
and/or kickback.
- Follow the manufacturer's sharpening and maintenance
instructions for the saw chain. Decreasing the depth
gauge height can lead to increased kickback.
ADDITIONAL SAFETY INSTRUCTIONS
PERSONAL SAFETY
•
Do not touch rotating chain
•
Always use approved personal protective equipment, this
reduces the danger of injury from thrown about cutting
material and accidental touching of the saw chain:
- Safety helmet, when there is a hazard of falling
branches or similar
- Hearing protection
- Protective glasses or a face mask
- Gloves with saw protection
- Trousers with saw protection
- Safety boots with saw protection, steel toes and non-
slip soles
•
Do not operate pruning saw near other people,
children or animals
•
Do not operate pruning saw after drinking alcohol
or under the influence of intoxicating drugs or
medication
•
Ensure that children do not play with the tool
AFTER USE
•
Always switch off the machine and remove the battery
- whenever leaving the machine unattended
- before clearing jammed material
- before checking, cleaning or working on the machine
- after striking a foreign object
- whenever the machine starts vibrating abnormally
•
Store the machine indoors in a dry and locked-up place,
out of reach of children
- store the battery pack separately from the machine
BATTERIES
The battery supplied, if any, is partially charged (to
•
ensure full capacity of the battery, completely charge the
battery in the battery charger before using your machine
for the first time)
•
Only use the following batteries and chargers with
this machine
- SKIL battery: BR1*31****
- SKIL charger: CR1*31****
•
Do not use the battery when damaged; it should be
replaced
•
Do not disassemble the battery
•
Do not expose machine/battery to rain
•
Permitted ambient temperature (machine/charger/
battery):
- when charging 4...40°C
- during operation –20...+50°C
- during storage –20...+50°C
EXPLANATION OF SYMBOLS ON MACHINE/BATTERY
3 Read the instruction manual before use
4 Batteries may explode when disposed of in fire, so do not
burn battery for any reason
5 Do not expose machine to rain
6 Wear protective glasses and hearing protection
7 Store machine/charger/battery in locations where
temperature will not exceed 50°C
8 Do not dispose of electric machines and batteries
together with household waste material
9 Beware of pruning saw kickback and avoid contact with
bar tip
q Always use two hands when operating the product
USE
•
Assembly and adjustment instructions
! stop the motor and remove battery from machine
! always use protective gloves when handling the
chain
•
Assembling bar and chain
- place the pruning saw on any suitable flat surface.
Remove the side cover F by turning side cover knob E
counterclockwise w
- lay the new saw chain D in a loop on a flat surface and
straighten any kinks e
- place the
chain drive links
Position the chain D so there is a loop at the back of the
guide bar C r.
- place the loop around the sprocket U t
! ensure chain is in correct running direction by
15
S into the
guide bar groove
T.
Publicidad
