Dovre 640WD/V2 Instrucciones De Instalacion Y Uso página 39

Connecting to the rear
1. Remove the connection collar (2) from the top of
the appliance.
2. Remove the cover (A) from the rear of the
appliance.
3. Fit the connection collar (2) to the back wall using
the mounting materials supplied (3,4,5).
4. Fit the cover (A) to the top plate using mounting
materials (B,C,D,E).
Connecting to the top
As standard, the appliance is delivered with the
connection collar fitted for a connection at the top,
see following figure.
On delivery, the connection at the rear is closed, so
that a back cover does not need to be installed.
Subject to change because of technical improvements
Because of the distance to the (combustible)
wall, the protection plate may not be removed
in the back shield.
Installing and connecting
1. Position the appliance in the correct place, and
make sure it is level. The appliance is designed
with adjustable feet, which may already be
mounted on the appliance or be included. Use
these adjustable feet so that the appliance can
be placed perfectly level.
2. Connect the appliance to the flue hermetically.
3. Re-position all removed parts in the correct
places in the appliance.
Never use the appliance without the fire-
resistant inner plates.
The appliance is now ready for use.
D OVRE
13