Dovre 640WD/V2 Instrucciones De Instalacion Y Uso página 42

4. Close the door of the appliance.
5. Close the primary air inlet by moving the control
slide to the central position.
Do not fill the appliance by more than a third.
Controlling combustion air
The appliance has one air slide that regulates the
primary air, the air-wash-air and the secondary air
inlet. If the air slide is as far to the left as it will go, the
primary and secondary air inlets are open. As the air
slide is moved more to the right, this closes off the
primary air inlet and then the air-wash-air and
secondary air inlet. If the air slide is slid as far to the
right as it will go, a small air vent remains open to
allow for post-combustion under the baffle plate.
When the dash on the handle matches the dash on
the bottom plate, the primary air inlet is closed, which
is the maximum air control position. See next figure.
D OVRE
16
Advice
Never burn wood with an open door.
Regularly burn wood with intense roaring
fires.
If you burn at a low setting frequently, tar and
creosote may be deposited in the flue. Tar
and creosote are highly combustible
substances. Thicker layers of these
substances may catch fire if the temperature
in the flue increases suddenly. By allowing the
fire to burn very intensely regularly, layers of
tar and creosote will disappear.
Low-intensity fires can also cause tar deposits
on the stove window and door.
When the outside temperature is mild, it is
better to burn wood intensely for a few hours
instead of having a low-intensity fire for a long
period of time.
Control the air supply using the air vent.
The air inlet not only supplies air to the fire but
to the glass as well, so that it does not quickly
become dirty.
Open the primary air inlet for the time being if the
air supply by the secondary air inlet is inadequate
or if you want to fan the fire.
Subject to change because of technical improvements