•
Switch off the device and disconnect it from the power supply before changing
accessories or approaching moving parts.
Always unplug the appliance from the outlet whenever the appliance is left
unattended and before assembling, disassembling or cleaning it.
•
Be careful when pouring hot liquid into the food processor or blender as it
may be expelled from the appliance by sudden evaporation.
•
The device may only be used with the supplied base.
CAUTION
Risk of burns! The surfaces can become hot during operation and
remain warm for a long time after use. Allow all parts to cool down
completely before disassembling and cleaning the device.
•
Only operate the device on a fl at, level surface. Operation on sinks, drainers or
uneven surfaces is prohibited.
CAUTION
Risk of injury! Keep hands and utensils out of the blender jar
during use. The spatula can be used when the device is switched
off and disconnected from the mains.
•
Always operate the device with the lid on.
•
Never bypass the safety interlocks.
•
Do not attempt to open the lid or remove the blender jar when the appliance
is in use.
•
When opening the lid, pay attention to the highly heated food.
•
Always insert the measuring cup/lid plug correctly into the opening at the top
of the blender jug lid when processing food.
•
Do not use the device for more than 2 minutes on the highest speed level 8, 9
or 10 as the motor can overheat. Turn off the device and allow it to cool for at
least 1 minute before proceeding.
CAUTION
Risk of burns! When mixing/stirring hot liquids (never mix hot oil
or fat), pour them through the jar's special removable lid. Start
processing at a lower speed. Keep hands and other exposed skin
away from the lid to avoid burns.
EN
63