Publicidad
Idiomas disponibles
Idiomas disponibles
Information Display (continued)
Display Icon
3463-565A
The operator is not in the
seat.
The blade-control switch
(PTO) is engaged.
The blade-control switch
(PTO) is engaged but the
machine is preventing the
blades from running.
Check the interlocks or
active machine faults.
The parking brake is
engaged.
When this flashes,
release the parking brake
before driving the
machine.
The motion-control levers
are in the N
-
EUTRAL
LOCK
position.
When this flashes, move
the levers inward before
driving the machine.
Hour meter
Engage the parking
brake.
Page 3–4
The battery temperature
is too high.
The battery load is too
high.
Limp mode is active.
The motor temperature is
too high.
The motor load is too
high.
Fault code
Product Overview: Control Panel
Publicidad
