Publicidad
Idiomas disponibles
Idiomas disponibles
Operation and function
EN
Switch on appliance
54
NOTE
To remove the lid, first turn the lid in anti-clockwise direction
►
towards the symbol
off the lid.
NOTE
The lid locking device is installed only on the model series
►
3005, 3006 and 3008.
Fill the water tank with the required amount of water, but not
‹
higher than the Max. mark on the tank.
Place the lid onto the water tank (see chapter
‹
tank with lid).
Place the teapot on the water tank.
‹
NOTE
Ensure that the rotary knob is turned completely in anti-
►
clockwise direction. Only then insert the plug into the plug
socket.
Turn the rotary knob in clockwise direction until the desired
‹
setting is reached.
The thermostat permits a stepless setting of the water tempera-
ture. You have the choice between the following settings: warm,
hot, boiling (intermittent boiling).
Warm/hot
If you turn the rotary knob to position
be heated to the corresponding temperature and then held at this
temperature.
Boiling
If you turn the rotary knob completely in clockwise direction to po-
sition
, the water will be boiled quickly. If you leave the rotary
knob in this position, the water will boil continuously until it has
completely evaporated.
to unlock the lid and then simply lift
or
BEEM - Elements of Lifestyle
Close water
, the water will
Publicidad
