Publicidad
Idiomas disponibles
Idiomas disponibles
Faults - causes and remedies
The following table helps in localising and remedying minor faults:
Fault
The indicator light
does not come on
when the appliance is
switched on.
The automatic circuit
breaker in the fuse box
trips
The indicator light
comes on but the appli-
ance is switched off
NOTE
If you cannot resolve the problem with the steps de-
►
scribed above, please contact after-sales service.
BEEM - Elements of Lifestyle
Possible cause
Plug not inserted into
socket
Automatic circuit breaker in
fuse box tripped
Rotary knob not in the
correct position
Too many appliances con-
nected to the same power
circuit
Appliance defective
No water in the water tank.
Appliance is severely
scaled
Troubleshooting
Remedy
Insert plug
Switch on the auto-
matic circuit breaker
again
Turn the rotary knob
to the correct position
Reduce the number
of appliances on the
power circuit
Contact After-sales
Service
Refill with water
Descale the appli-
ance and reset the
dry running protec-
tion as described in
chapter Reset the
dry running protec-
tion.
EN
63
Publicidad
