Sony MHC-551 Manual De Instrucciones página 14

-F
B
> continued
2 Press & OPEN/CLOSE and place a CD.
Then, press & OPEN/CLOSE again to
close the disc tray.
3 Press EDIT on the remote.
"TAPE SELECT" appears and the player
divides the selections automatically.
4 insert a blank tape of the indicated
length (or longer) into deck B.
To record Press DIRECTION to
select
One side of the tape ==
Both sides" => or RELAY
* Recording always stops at the end of the
reverse side. Be sure to start from the.
front side.
6 Press CD SYNCHRO.
Deck B stands by for recording.
7 Press If PAUSE to release recording
pause.
Recording starts.
After about 10 seconds, the CD starts
playing.
|
Recording a CD:
Specifying Tape
Length (time edit)
You can have the stereo system create
programmes based on the tape length. The
CD player makes programmes that will fit
the tape length. For example, if you use a
40-minute tape to record a 46-minute CD,
the CD player will automatically choose
tracks that will fit within the 40-minutes,
filling as much of the tape as possible. The
player will not programme those tracks
beyond track number 20. Use the buttons
on both the unit and the remote to do this
operation.
Chapter 4: the Tape Player
"IO wt & OB wt hO)
'T Press FUNCTION repeatedly until "CD"
appears in the display.
2 Press & OPEN/CLOSE and place a CD.
Then, press 2 OPEN/CLOSE again to
close the disc tray.
3 Press EDIT twice on the remote.
"TIME EDIT" appears in the display.
Then "SELECT" and "TIME" appear
alternately in the display.
4 Tum the JOG dial (or press [E} or [3]
on the remote) to designate the tape
length.
Choose the indication for tapes of a
corresponding minute length. Choose
"HALF" if you want the CD player to
play just half the total playing time of
the CD without changing the order of
the track.
As you turn the JOG dial or press [J or
[3] on the remote, the indication
changes as follows:
HAL F=f -45—-£-54
[ (23:00) aro |
£-99—-0- 14-56
Pega Bl aa 2
(45:00)
(37:00) {30:00)
Note
You cannot select "HALF" when you
want to record CD which has more than
20 tracks.
5 press EDIT on the remote.
The CD player determines the tracks to
be recorded on side A automatically.
Tracks to be recorded on side A
Total playing time on side A
6 when you want to record on both sides,
press EDIT on the remote again.
The CD player determines the tracks to
be recorded on side B.
When you want to record only on side
A, press Mf on the CD player to stop the
indication from flashing.
7 Press EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
& select dual or single-sided recording.
Press DIRECTION to
select
_—
—
To record
One side of the tape
Both sides*
C= or RELAY
* Recording always stops at the end of the
reverse side. Be sure to start from the
9 Press CD SYNCHRO.
Deck B stands by for recording.
10 Press §f PAUSE to release recording
pause.
Recording starts.
After about 10 seconds, the CD starts
playing.
To stop recording
Press M™ on deck B or the CD player.
To check the order
Press CHECK on the remote repeatedly.
Each time you press CHECK, the number
of the programmed tracks appear in the
display.
To cancel time edit
Press ™ on the CD player and then press
CONTINUE.
To select the desired tracks
beforehand
You can place priority on some tracks to be
recorded by selecting them before
programming (only up to 20 tracks). See
"Playing Tracks in the Desired Order
(programme play)".