Publicidad
Idiomas disponibles
Idiomas disponibles
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that "DOLBY NR B" appears
in the display after step 8.
pee a
ater aan
eee
as
|
Recording a CD:
Specifying Track
Order (programme
edit)
You can adjust the total recording time to
the tape length while making a programme.
Use the buttons on both the unit and the
remote to do this operation.
POWER—-ON
© | Ce
|
On
# AUIN
wh
ND
1 Press FUNCTION repeatedly until "CD"
appears in the display.
2 Press & OPEN/CLOSE and place a CD.
Then, press 2 OPEN/CLOSE again to
close the disc tray.
3 Press PROGRAM.
"PROGRAM" appears in the display.
4. Turn the JOG dial (or press (EJ or (3)
on the remote) to choose a track.
5 press ENTER/ NEXT.
The chosen track number lights up in
the music calendar and is memorized. If
the track number disappears before you
press ENTER/NEXT, go back to step 4.
6 Repeat steps 4 and 5 to programme the
remaining tracks you want to record on
side A in the order you want them to be
recorded.
7 Press [[[} on the remote to pause
recording at the end of side A.
"P" appears in the display. The total
playing time "0.00" is displayed.
8 Repeat steps 4 and 5 to programme the
remaining tracks you want to record on
side B in the order you want them to be
recorded.
9 Press & EJECT and insert a blank tape
into deck B with the side you want to
record 6n facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
10 select dual or single-sided recording.
To record
Press DIRECTION to
select
:
One side of the
=
tape
Both sides*
C=? or RELAY
*
Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
11 Press CD SYNCHRO.
Deck B stands by for recording.
12 Press tf PAUSE to release recording
pause.
Recording starts.
After about 10 seconds, the CD starts
playing.
To stop recording
Press Ml on deck B or the CD player.
To check the order
Press CHECK on the remote repeatedly.
Each time you press CHECK, the number
of the programmed tracks appear in the
display.
To cancel program edit
Press CONTINUE so that "PROGRAM"
disappears from the display.
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that "DOLBY NR B" appears
in the display after step 10.
REE
ee
Recording From the
Radio
You can record from the tuner onto a tape.
Use TYPE I (normal) or TYPE TI (CrO2}
tape.
POWER—ON
DOLBY NR
1 Piess
& EJECT and insert
a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
2 Press TUNER/BAND several times until
the desired radio band appears.
3 Tune in the radio station you want to
record. (See "Listening to the Radio", or
"Playing Preset Radio Stations" for
details.)
4. select dual or single-sided recording.
To record
Press DIRECTION to
select
One side of the
=
tape
Both sides"
C=3 or RELAY
*
Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
continue to next page >
Chapter 4: the Tape Player
Publicidad
