POWER—ON
Your stereo system is provided with 15
different preset effects (music menu)
created from different graphic equalizer
and surround effect settings.
With the press of a single button, you can
DBFB
GROOVE
choose between a variety of effects
according to musical genre or use. The
personal file function (see page 18) lets you
store your own effects.
POWER—ON
Adjustment
Adjusting the Sound
Selecting the Audio
Emphasis
EFFECT ON/OFF
To adjust the volume
Turn VOLUME on the unit or press
VOL (+/-) on the remote.
To reinforce bass
Press DBFB* repeatedly until "DBFB BN\"
or "DBFB BX\" appears in the display.
"DBFB BN"
is more effective than
"DBFB BN" .
¥ Press one of the MENU buttons (or
MUSIC MENU <@ / a> on the
remote) to select MENU.
See the chart "Music menu options" on
the following page. The last effect
2 Use the JOG dial (or press MUSIC
MENU g / 8 on the remote
repeatedly) to select the preset you
desire.
The preset name appears in the display.
*
DBFB = Dynamic Bass Feedback
ff you use the DBFB System with the
graphic equalizer
If the bass is too strong, the music will
sound distorted. Adjust the bass slowly
while listening to music so that you can
monitor the effect of the adjustment.
3 Press ENTER/NEXT.
To cancel the effect
Press EFFECT ON / OFF (or MUSIC MENU
ON/OFF on the remote) so that "EFFECT
OFF" appears in the display.
To get a powerful sound (GROOVE)
Press GROOVE.
The volume switches to power mode, DBFB
is automatically set to full strength, the
'
equalizer curve changes, and the
continue to next page >
"GROOVE"
button lights up. Press
GROOVE again to return to the previous
volume.
Note
Cancelling GROOVE does not cancel the
DBFB level or equalizer curve.
To cancel the DBFB level, press DBFB
repeatedly until "DBFB BXN\" or
"DBFB B\\" disappears from the display.
Adjust the equalization to obtain the effect
you desire.
To listen through the headphones
Connect the headphones to PHONES jack.
No sound will come from the speakers.
Chapter 5: Sound Adjustment