Publicidad
Idiomas disponibles
Idiomas disponibles
6. DAILY USE
CAUTION
The electronic clock features Touch-
Control technology. To operate,
simply touch the glass control
symbols with your fingertip.
The touch control sensitivity continuously
adapts to ambient conditions. Make sure
the glass surface of the control panel is
6.1 Setting the time on the
Electronic Clock
6.2 Manual Operation
The oven is ready to be used when the
clock has been set. Select a cooking
function and a temperature.
When you begin cooking, temperature
indicator lights up to indicate that the
clean and free of obstacles when plugging
in the oven.
If the clock does not respond correctly
when you touch the glass, unplug the
oven for a few seconds and then plug it in
again. Doing this causes the sensors to
adjust automatically so that they will react
once more to fingertip control.
When the oven is connected to the power
network, AUTO (A) and the figures on the
timer will flash. Set the current time of day
as follows:
1. Press in the
simultaneously till you hear a beep. A
point (C) between the figures of the
timer will start flashing.
2. Set the correct time of day using the
and
buttons. You will hear a
beep confirming the time selected.
The heat symbol (B) stays lit.
IMPORTANT
The time can be changed whenever
you like; follow the instructions
above to do so.
oven is heating the contents; the indicator
goes out when the selected temperature
is reached.
Set the controls to
off.
ENGLISH
and
buttons
to turn the oven
9
Publicidad
