Publicidad
Idiomas disponibles
Idiomas disponibles
TELETEXT FUNCTIONS
To call up a stored page:
1. Press 4
(Mode) button to
engage the LIST mode.
The letter "L" indicating the LIST
mode and stored* page numbers
are displayed at the bottom of the
screen.
2. Press COLOUR button of the
same colour as the colour of
the number of the Teletext
page you want to view.
* To release the LIST mode, press
E14 (Mode) button again.
Note: .........00ccccceeee
¢ For manufacturing reasons, page
numbers are stored before shipment
from the factory.
To store a desired Teletext page, see
the next section "To change a stored
page number."
(pZ60S°ON)
pL
To change a stored page
number:
1. Select a PR channel that is
broadcasting a Teletext
programme.
2. Press <4 (Mode) button to
engage the LIST mode.
The letter "L" indicating the LIST
mode and stored page numbers
are displayed at the bottom of the
screen.
Select the desired page
number, and press COLOUR
button of the same colour as
the colour of that page
number.
&
4.
>
Enter the number of the
Teletext page you want to
store in three digits using the
numeric buttons.
If you want to change another
page number, repeat steps 3.
and 4.
Press _2,(Store) button until
the displayed page number
momentarily changes to
white.
This compietes storing of the
Teletext page.
Sub-teletext page
display
Some teletext pages have sub-pages,
which scroll automatically. You can
store those pages in memory to view
later on.
1.
2.
&
Select a teletext page with
sub-pages.
Press © (Sub page) button.
"T * x» x »" is displayed at the top
right of the screen.
Enter the sub-page number.
Example:
©.©. © '6. page, press
The page number displayed at the
bottom of the screen is followed by
"+", indicating that you are viewing
a sub-page.
NONG os vssuvccntctersosssoteedsiccctorscsssnsndese
« "+" is not displayed when
items are
displayed at the bottom of the screen.
TROUBLESHOOTING
Problem
N3EXS6¢e
Action
Cannot tum TV ON
Press () (Main power) button.
Insert the power plug in an AC outlet.
No picture or sound
Press GS (TV/EXT) button to engage the correct mode.
Check the aerial connections.
inoperable remote control
Replace the batteries.
The power shuts OFF automatically
No sound
Press ©, (Standby) button to tum the TV ON again.
Disconnect the headphones.
Set "*@ MODE" (Speaker mode) to ON (See page 22).
No sound from headphones
Set "*@MODE" (Speaker mode) to ON (See page 22).
No sound with stereo broadcast
Press 21% (Multi sound) button to select CD (stereo
sound).
No sound for Sub-I or Sub-II for
programmes broadcast with dual
sound
Press @U% (Multi sound) button to select the appropriate
mode.
No sound from external speakers
Turn your audio amplifiers ON, and set your audio
Surround function does not function
properly
| empire to the normal volume.
DOLBY PRO LOGIC or PRO LOGIC 3D-PHONIC will not
produce the correct effect except with Dolby Surround
encoded programmes.
The correct effect of functions other than HYPER SOUND
and Headphone surround will not be produced in monaural
sound programmes.
The correct effect of HYPER SOUND will not be produced
in stereo programmes.
Poor colours
Adjust the COLOUR and BRIGHTNESS controls.
Press 3
(Colour system) button to select the appropriate
system.
Press 28% (Cinema/game) button to select STANDARD
Lines or streaks in picture
(interference)
mode.
Move the components apart until the interference is
eliminated.
Spotted picture (crosstalk)
Move the aerial away from the source of interference.
Move the aerial to a different position or direction.
Replace the aerial cable with a coaxial cable, which is
Double pictures (ghost)
less prone to interference.
Move the aerial to a different position, height or direction.
Replace with an aerial having good directivity.
Snowy picture (image noise)
Check the aerial connection and direct it correctly.
Replace or repair the aerial.
The screen turns black
Broadcast is not being received. Select another PR
No receivable Teletext programme
{senna
Turn to a PR channel that broadcasts teletext information.
You cannot watch teletext broadcast recorded on a video
The current time is not displayed
tape.
Receive the TELETEXT broadcast.
The current time moves to the side of the
screen
The reception state of TELETEXT broadcast is poor, press
& (Display) button to erase the current time display.
The following are normal occurrences and are not the result of TV malfunctions:
* Your TV may emit a crackling sound
problem unless the picture or sound
due to a sudden change in temperature. There is no
is abnormal.
colouration also disappears.
27
—
Publicidad
