Publicidad
Idiomas disponibles
Idiomas disponibles
(pZ60S°ON)
p
PREPARATION
NALXS62-
Presetting PR channels (Programmed channels)
To watch TV, you must first set the broadcast channels to the PR channels on your
TV.
You can set up to 100 channels you want to watch. (PRO1 to 99, PROO(AV)).
There are two ways of setting PR channels, automatic setting and manual setting.
* After you have set the PR channels, the PR channels can be edited. For details,
see page 13.
PR channel up/down button
Display button
Menu buttons
Picture/sound button
INSTALL button
@ Automatic setting
(AUTO PROGRAM)
Broadcast channels that can be
received are automatically judged, and
PR channels are set in order from low
frequency broadcast channels.
twice.
The channel is automatically set,
and the EDIT menu is displayed.
*To edit PR channels, see page
13.
4. Press &, (Display) button
Automatic setting is handy as PR
The setting is complete.
channels can be set easily.
NOG i oisscibetiteststlavelatenddiesastonvesteons
1. Press ine.
(Install)
* With automatic setting, a broadcast
button
channel cannot be set to PR channel
;
PROO (AV).
2. Press
or
menu
To set a broadcast channel to PROO
(AV), set by manual setting or by
button to select AUTO
eckiig.a PRichannel.
PROGRAM.
3. Press
(Picture/sound)
button twice.
PREPARATION
@ Manual! setting
5. Press
(Picture/sound)
utton.
1. Press Ar
(Install)
The on-screen display blinks once,
button.
and the current settings are stored
2. Press
or
menu
as a PR channel.
button to select
MANUAL,
Repeat steps 3 to 5 to store all
then press
(Picture/
desired broadcast channels.
sound) button.
6. Press &, (Display) button
twice.
The setting is complete.
NOG? iciccst cscctssstevstscveschiscatatnoastoaese
* You can preset a channel number to a
PR channel by directly entering the
channel number of the desired
broadcast channel. For details, see
EDITING PR CHANNELS on page 13.
Oeeseaccnnunesvevencanesseseanaucsgeuuanenepesseaunars
MANUAL
TCH
2
>
PRO1
FINE
a
S_° em:sTORE
G:EXIT
3. Press [@] (PR channel up/
down) button to select PR
channel number.
4. Press C —) or(4_) menu
button to select the
broadcast channel.
Scanning is stopped automatically
when a broadcast is received.
Repeatedly press(C
— ) or
menu button to scan until the
desired broadcast is received.
CH: Terrestrial broadcast channels
CC: Cable TV channels
NOlOSS Siiciccsccsiisacsissivincedericanencecuses
+ For details on the relationship
between the displayed CH/CC
broadcast channel number and the
actual broadcast channel number, see
Broadcast Channel Correspondence
Table on page 16.
¢ If the picture is not clear:
Press
menu button to select
FINE.
Then press C —) or
menu
button to fine-tune the channel.
Publicidad
