Dreame X40 Ultra Manual De Usuario página 17

How to Use
Vacuum and Mop
Note: When using the mop assembly for the first time, the robot performs the
"Vacuum and Mop" task by default.
1. Start cleaning
Press the button on the robot, or use the app to make the robot start from
the base station. Then the robot will plan the optimal cleaning route and
perform the cleaning task based on the created map.
Note:
· To ensure the robot easily returns to the base station after cleaning, it is
recommended to make the robot start from the base station.
·
The mop pads will be cleaned before the robot starts mopping, please wait
patiently.
· Do not move the base station, the clean water tank, the used water tank, or
the washboard during operation.
· Hot water cleaning can be enabled in the app for mop pad and washboard
base cleaning tasks, which applies to all modes. To prevent scalding, do
not touch the water outlet when the function is on.
2. Auto mop washing
When cleaning, the robot will automatically return to the base station to wash
mop pads based on the mop pad cleaning frequency specified in the app.
The base station will automatically refill the robot's water tank and the robot
will resume cleanup.
EN
15