Dreame X40 Ultra Manual De Usuario página 24

Routine Maintenance
EN
Main Brush
1. Press the brush guard clips inwards to remove the brush guard and lift the
brush out of the robot.
2. Pull out the brush covers at both ends of the brush as shown in the figure.
Use the provided cleaning tool to remove any hair tangled in the brush.
Reinstall the brush covers on both ends of the brush, and then reinstall the
brush. Press on the brush guard to lock it in place.
22
Side Brush
Unscrew the side brush with a screwdriver, clean the hair from the brush, and
then screw it back on.