Ambu aView 2 Advance Instrucciones De Uso página 14

18
• Press OK to confirm.
Log in as any user profile:
• Press the Login tab.
• Press arrow right, then press your user name.
• Enter your password and press Login.
Change username or password:
• Press the Settings tab, then press User Profiles.
• Press the username 17 , then press the edit icon 18 .
• Enter the new username, password, and repeated password in the respective input fields 20
and press the save icon 19 .
Note: The Administrator can change username and password for other user types.
4.3. General settings
The Administrator can enable and disable functionalities for all users.
In the Setup menu under the tab General Settings the following functionalities can be enabled
or disabled using the ON/OFF sliders:
USB Management – possibility to enable file export, software upgrade, import of TLS
certificate and ability to print using the USB port. Refer to sections 5.2.3, 7.2, 8.4, 9.2.
Communication Settings – enabling allows the possibility to upgrade software on-line if
connected to the Internet. Refer to section 9.2.
Archive Settings – decide when a procedure is moved to the bin and when it is deleted
from the bin. Refer to section 7.3.
180° Rotation, Zoom, Stopwatch, ARC – functions available during a procedure can be
disabled for all types of scopes and users. Refer to sections 6.6, 6.7.
Login Settings – determine if a user that is not logged in can still access the archive and
see the Worklist. Refer to sections 6.4, 7.1.
User inactivity settings – choose if the displaying unit will logout the user due to inactivity.
Note: Be aware that if a function is disabled (not green), the symbol is not visible in the menu where it is
normally located.
4.4. Mounting the displaying unit on a pole
The displaying unit can be mounted on a pole with wheels for easy portability, e.g. an IV pole.
Pole mounting brackets are supplied with the displaying unit. Letters in grey circles
to the illustrations in the Quick Guide on page 2.
Attach the bracket to a pole: Cb
• Fold out the bracket and tighten the nut in the centre.
• Attach the bracket to the pole, and ensure the knob is tightened sufficiently.
• Attach the power supply bracket to the main bracket and place the power supply in the
power supply bracket.
14
17
19
20
refer