Ambu aView 2 Advance Instrucciones De Uso página 25

6.7. Using the stopwatch
You can use the displaying unit's stopwatch to record the duration
of the procedure or parts of the procedure. While the stopwatch is
running, you can make timestamps to mark specific points in time.
Use the stopwatch:
• Press the stopwatch icon 17 to start the stopwatch.
• Press the plus sign 18 to make a timestamp while the stopwatch
is running.
• Press the stopwatch icon again to pause the stopwatch.
• When the stopwatch has been paused, you can start it again by
pressing the stopwatch icon, or press the plus sign to start the
stopwatch with a new time stamp.
Note: The stopwatch keeps running in the background even if it is covered by
the Live View screen, e.g. while Dual View is active.
Note: The stopwatch will stop running when the visualization device is
removed. If the same visualization device is reconnected within 60 seconds,
the stopwatch will resume automatically. If more than 60 seconds pass, press
Continue procedure to resume the procedure and keep the stopwatch running.
6.8. Using Dual View
With Dual View, the Live View screen can show live image from two visualization devices
connected at the same time.
Use Dual View:
• Connect two Ambu visualization devices to connector ports on the displaying unit.
• The Live View screen shows two images, one larger and one smaller. The number shown in
each image corresponds to the number on the connector port of the displaying unit.
• Press the switch icon 19 to switch image sizes.
6.9. Taking photos and recording videos
Take a photo:
• Press the photo icon
procedure folder.
Record a video:
• Press the video icon
• Press the video icon again to stop the video recording that is automatically saved in the
current procedure folder.
• If needed, record a video with sound simultaneously (see section 8.3.).
Note: Image rotation is saved in the video recording, but zoom function is not.
Note: It is possible to take photos while recording a video.
Note: A video can be maximum 30 min. You will be notified that the video recording is soon to stop.
A new recording can be started immediately.
to take a photo that is automatically saved in the current
to start a video recording.
19
18
17
25