Held eVest Clip-in Manual De Utilización página 26

26
eVest Clip-in/eVest
General Information
Manufacturer name and address
» Held GmbH
An der Ostrach 7
87545 Burgberg | Germany
Type of product and Product name
» Motorcyclist airbag
» eVest Cilp-in, eVest
Type and reference of the inflation
system
» Type: Electronic autonomous In&motion airbag
» Reference: IMS Moto 1
Information related to the selection of
the good size
» The vest must be worn and fitted correctly so
that the protection is perfectly in place. To
obtain optimal protection and comfort, please
Safety precautions
Warning related to modifications or
misuse that could compromise the vest's
functionality.
» Any modification or improper use may signifi-
cantly reduce the system's performance. Do
not, under any circumstances, modify your air-
bag vest nor its components. Any modification
of any kind may compromise its functionality
and, consequently, its protection performance
in case of a fall or accident. Never add decora-
tions, ribbons, self-adhesive patches, or other
items to areas that are covered by the airbag.
» Never connect an electronic device or an
external battery to the system. The vest's
components must never be modified.
» This product should only be serviced/repaired
by HELD to guarantee the full functionality of
this product. Under no circumstances should
the vest be modified or disassembled.
EN
select the right size and ensure that the vest is
fitted correctly to your body. Close all closures
and tighten all straps to ensure correct fit and
thereby maximal safety potential.
» If necessary, refer to the following table to
select the appropriate size for your body shape:
Figure 1: Sizechart Shoulder-waist-
measurement (B)
B
C
D
Warning
» Reduced ergonomic comfort, body strain due
to the products weight or heat stress may be
associated with the use of this product which
can be inappropriate for some riders. The
de gree of risk or hazard that a motorcyclist will
face is closely linked to the type of riding and
the nature of the accident. Riders are advised
to carefully choose motorcyclists' protective
garments that match their riding activity and
risks. Other garments or garment combinations
certified according to the EN 17092:2020 series
of standards may provide more appropriate
protection than this garment but their use can
be associated with reduced ergonomic comfort
(e.g. restricted range of movement), body strain
due to their weight or heat stress which can be
inappropriate for some riders.
» The airbag product must not be used by
persons wearing a pacemaker or any other
User Manual
XXS 37 – 42 cm
XS 37 – 42 cm
S 37 – 42 cm
M 40 – 45 cm
L 42 – 47 cm
A
XL 42 – 47 cm
2XL 42 – 47 cm
3XL 42 – 47 cm