Held eVest Clip-in Manual De Utilización página 46

46
eVest Clip-in/eVest
Performance
» The degree of risk or hazard that a motorcyclist
will face is closely linked to the type of riding
and the nature of the accident. Riders are
cautioned to carefully choose motorcyclists'
protective garments that match their riding
activity and risks. Other garments or garment
combinations certified according to the EN
17092:2020 series of standards may provide
more appropriate protection than this garment
Limitations of use
» Always use your motorcycling garments in
combination with other forms of PPE including
helmts (ECE 22.06) as well as other correspon-
ding complementary PPE such as jackets (EN
Product recycling
» At the end of this product's life, please do
not dispose of this product in your general
household waste. Instead, in order to prevent
possible harm to the environment or human
health from uncontrolled waste disposal, please
dispose of this product separately in accordan-
ce with your local laws and regulation. For more
Notified body
The IMP Moto has been tested according to the standard EN 1621-2.
The IMP Moto 1 back protector has been tested according to the protocol CP-001 and the
standard EN 1621-2.
They have been certified by the notified body:
Aliénor Certification n°2754
ZA du Sanital
21 Rue Albert Einstein
86100 CHATELLERAULT
FRANCE
The declaration of conformity may be consulted
at www.held.de/conform
EN
but there may be increased weight, ergonomic
drawbacks (e.g. limited range of motion) or
increased heat associated with their use that
may be less appropriate for some riders.
» This PPE garment is designed to provide
impact protection for the areas covered by the
impact protector(s). It does not offer abrasion
protection.
17092:2020), trousers (EN 17092:2020), other
impact protectors (EN 1621), boots (EN 13634),
gloves (EN 13594), visibility clothing (EN 1150)
or high visibility accessories (EN 13356).
information on the separate collection systems
for waste electrical and electronic equipment
that are available for consumers, near your
home, free of charge, please contact your local
municipality authority. The inflator's expiry date
is indicated on the label.
» The back protector has a lifetime of 5 years.
Registered trademark
In&motion® is a trademark owned by In&motion.
In&motion
10 rue de la Lyre
CRAN-GEVRIER
74960 ANNECY
FRANCE
User Manual