Held eVest Clip-in Manual De Utilización página 40

40
eVest Clip-in/eVest
User security is In&motion's primary concern
As part of our obligation, we strive to implement all the technological solutions that we have
available so that the In&box detection system can ensure the best degree of protection
and comfort. However, the user of this device is responsible for his/her protection, and the
detection system developed by In&motion will provide optimal protection only by adopting
responsible and respectful behaviour of road safety rules, without guaranteeing the absence
of damage. The embedded detection system cannot make up for behaviour that is dangerous,
disrespectful or contrary to road safety regulations.
Details regarding detection and deployment of the airbag can be found in the In&box user manual.
In order to ensure proper functioning
of the airbag protection, the user must
check the following before each use:
» The inflator present in the airbag system is
filled and connected properly; the LEDs on the
In&box indicate the inflator status according
to the In&box User Manual chapter "LEDs
meaning".
» The inflator present in the airbag system is
always usable; the inflator's expiration date is
indicated on the label on the inflator.
» When the airbag product has previously been
inflated, the user correctly followed the pro-
cedure explained on page 32 ff of this user
manual ("Replacing the inflator and/or other
components after inflation").
EN
» The In&motion detection system evolves over
time and the detection algorithms may be
updated thanks to the collection of anonymous
user data. Thus, applicable detection conditions
at a given date are indicated in the In&box user
manual to be downloaded from In&motion's
company website (www.inemotion.com). In
order to get the latest updated version of the
In&box user manual, please refer to the support
section in the www.inemotion.com website.
User Manual