Held eVest Clip-in Manual De Utilización página 44

44
eVest Clip-in/eVest
Clip-in system eVest Clip-in
Practical use
This information is only relevant to the eVest Clip-in (product code 92070)
» The HELD eVest Clip-in must be combined with
a compatible outer garment for it to function
correctly and protect the rider in a fall. The
HELD eVest Clip-in can be combined with a
compatible outer garment in a few seconds.
» The airbag must be integrated properly into the
compatible outer garment to achieve optimal
protection (refer to the illustrated guide
below).The HELD eVest Clip-in must not be worn
under clothing that is not designed for use with
a Clip-in product.
Place the eVest Clip-in
inside the open jacket.
Pass the attachment loops
through the mounting points
and close the press-studs.
EN
» This product is CE certified.
» The HELD eVest Clip-in is supplied with In&box,
inflator and back protector.
» IMPORTANT: only combine the HELD EVest Clip-
in with HELD-branded outer garments that are
certified compatible.
» A complete list of all Clip-in compatible HELD
jackets, as well as other Clip-in accessories,
can be found at www.held.de/clip-in.
Pull the Clip-in attachment
loops out of the jacket and
open the press-studs.
The jacket must be zipped
up in order to ensure
optimum protection.
User Manual
The vest is attached via the
five specially-designed blue
Clip-in mounting points.