Held eVest Clip-in Manual De Utilización página 43

User Manual | 92070 / 92170
Marking IMP Moto 1
The CE marking indicates that the impact protector is conform to regulatory requirements EU
2016/425.
Use and storage instructions
» The back protector must be used and stored
exclusively in temperatures between –15 °C
and 70 °C (5 °F and 158 °F). Prolonged exposure
of the system to temperatures exceeding this
range may compromise its functionality. Keep
the back protector in a clean space and away
from humidity. Transport the back protector in
clean packaging protecting it from humidity.
» After an impact, the back protector may be
partially damaged by having absorbed the
energy from the impact to reduce its force.
Systematically check your protection equip-
ment before using it again to ensure that it is
in good useable condition and not damaged.
If you suspect any deterioration, contact your
local reseller. Do not, under any circumstances,
modify your back protector nor its components.
Any modification of any kind may compromise
its functions and, consequently, its protection
performance in case of a fall or accident.
EN
Name of the back protector
The "CE" means that the product meets the
basic health and safety requirements of the
Regulation (EU) 2016/425
Pictogram indicating exclusive motorcycle use
of the protection with the type of FB protector
(full back protector), the performance level (1);
as well as the information concerning the size
(distance between the waist and the shoulder)
(Exemple)
Number and year of the European technical
harmonized standard: Clothing for motor-
EN 1621-2:2014
cyclists that protects against mechanical
stress - Part 2: Back protectors
In&motion
178 Route de Cran-Gevrier Name and address of manufacturer
74650 Chavanod France
» Do not repair or replace with any other parts or
accessories which are not an original In&motion
item. To clean the back protector, use a soft
wet cotton cloth on the foam or plastic part.
» [Warning]: do not clean the inflator. The inflator
connector and the inflator must not get in
direct contact with water.
» Do not bleach
» Do not iron
» Do not machine wash
» Do not dry clean
» Do not tumble dry
» Do not use a hair dryer
» Do not use detergent
» Dry away from sources of heat and away from
sunlight
eVest Clip-in/eVest
43