Held eVest Clip-in Manual De Utilización página 32

32
eVest Clip-in/eVest
Replacing the inflator and/or
other components after inflation
01 Replacing the inflator
» [Warning ]: Inflators are single-use. After an
inflation, it cannot be refilled and must be
replaced.
» [Warning ]: Do not touch the connector (blue
piece) at the end of the inflator. Do not
connect unless the inflator is securely screwed
in position in the airbag system.
» Only inflators provided by In&motion (ref: IMI
2368) are certified and assure the proper
functioning of the In&motion airbag system. Do
not use any other supplier or inflators with a
different reference number.
» To obtain a new inflator, you may go directly to
the In&motion website: www.inemotion.com or
contact In&motion at customer@inemotion.
com.
02 Post-triggering procedure
» After triggering, please follow the following
4 steps:
01 Check the integrity of the vest
02 Remove the empty inflator
03 Check the integrity of the In&motion
airbag system
04 Install a new inflator
» These steps are described below. In case of
damage or anomaly, do not use the vest and
contact your local reseller.
» The procedure is also explained on video, and
can be found on In&motion's YouTube channel:
https://bit.ly/InemotionTutoEN as well as in the
mobile app "My In&box".
In&motion
YouTube tutorial playlist
English
EN
03 Check the vest
» Check the integrity of the fabric parts and
plastic parts.
» Check the integrity of the back protector.
» Check the integrity of the connector.
» If you suspect any deterioration in the vest (ab-
rasion, holes, rips in the fabrics parts or plastic
parts, breakage or whitening of the plastic
parts, fabric bobbling, rupture of the vest
assembly threads), contact your local reseller.
04 Remove the empty inflator
[Warning ]: The inflator must be handled carefully.
Wash your hands before and after replacing the
inflator. Conduct the following operations in a
clean and dry environment.
05 Check the integrity of the
In&motion airbag system
» While the vest is inflated, check the integrity
of the fabric parts and seams. Check that the
seams are not fraying.
» If the vest does not inflate or deflates quickly,
do not use the vest and contact your local
reseller.
» Otherwise, remove the adapter by unscrewing
it, then completely remove the air contained in
the airbag system.
User Manual