Tecno-gaz ONYX B 6.0 Instrucciones De Uso página 59

WATER DISCHARGE PIPE
Use to drain the water used from the faucet on the front of the autoclave (Fig.A–pos.
(par. 10.8)
Picture
Envelope standard
Code
FITTING FOR REAR TAPS DISCHARGE
Tighten the loading faucet (Fig.A-pos.
faucet (Fig.A-pos. 03
Picture
Envelope standard
Code
PIPE FOR DISCHARGE UTILITIES
1 - Clean water overflow hose
2 - Used water overflow hose
1- Connect one end of the hose to the clean water overflow hose fitting (Fig.A-pos.
and the other in a water recovery container.
2- Connect one end of the hose to the fitting (Fig. A–pos.
water recovery container.
Picture
Envelope standard
Code
04
) to empty the drain tank.
Fig.8
1
DANA130
) to empty the loading tank and tighten the drain
Fig.9
1
CPRG096
01
Fig.10
2
SXBA799
ENGLISH
), and the other to a used
15 ) -
02 ),
11