Publicidad
Idiomas disponibles
Idiomas disponibles
13. MAINTENANCE TABLE
Intervention
MACHINE
Check all fasteners
Safety checks/check controls
Check the chain catcher
General cleaning and inspection
Cleaning the chain
Check the machine and bar lubrication holes
Check the chain drive sprocket
Chain maintenance
Bar maintenance
Topping up the chain oil level
* Interventions which must be carried out by your dealer or an authorised service centre
14. TROUBLESHOOTING
PROBLEM
1. Activatingthe the throttle
trigger lever and the
throttle lock button, the
machine does not start
2. The motor shuts down
whilst working
3. With the throttle lock button
and throttle trigger lever on,
the chain does not turn
First time
-
-
-
-
-
-
-
-
-
-
PROBABLE CAUSE
Battery is not inserted or
is inserted incorrectly
Low battery
Machine damaged
Battery is not inserted correctly
Low battery
Machine damaged
A motor protection trips
Excessive chain tensioning
Bar and chain problems
Machine damaged.
EN - 17
Frequency
And then after
every
Before each use
Before each use
Before each use
After each use
After each use
Before each use
Once a month
-
-
Before each use
SOLUTION
Make sure that the batteries
are inserted correctly
Check the battery status and
recharge if necessary.
Do not use the machine
Remove the batteries and
Contact a Service Centre
Make sure that the batteries
are inserted correctly
Check the battery status
and recharge if necessary.
Do not use the machine
Remove the batteries and
Contact a Service Centre.
Wait 15min for the machine to
cool down and then restart it
Retension the chain.
Check that the chain runs
freely and the bar guides
are not deformed.
Do not use the machine.
Immediately turn off the
machine, remove the
batteries and Contact an
Authorised Service Centre.
Publicidad
