Publicidad
Idiomas disponibles
Idiomas disponibles
4. The chain heats and
emits smoke on the
end part of the bar.
5. The motor runs irregularly
and lacks power when revved
6. No oil is released
7. The machine has struck
a foreign body.
8. Excessive noise and/or
vibration is experienced
whilst working
9. The machine gives off
smoke whilst working
10. Battery power
reserve is low
Excessive chain tensioning
Lubricant oil tank empty.
Bar and chain problems
Poor quality oil
Lubrication holes are clogged
Damaged or loose parts.
Loose or damaged parts
Machine damaged
Severe working conditions
requiring greater
current absorption
Battery is insufficient for
operating requirements
Decrease in battery capacity
EN - 18
Retension the chain.
Fill the lubricant oil tank
Check that the chain runs freely
and the bar guides are not
deformed.
When the motor is cold, empty
the tank, clean it and the
pipes with liquid detergent
and change the oil.
Cleanthe lubrication holes
Stop the machine.
Inspect for damage.
Check for and tighten
any loose parts.
Have all checks, repair work
and replacements carried out
by an Authorised Centre only.
Turn off the machine,
remove the batteries and:
– inspect for damage;
– check for and tighten
any loose parts;
– have any damaged parts
replaced or repaired with
parts having equivalent
specifications.
Do not use the machine.
Immediately turn off
the machine, remove
the batteries and
Contact an Authorised
Service Centre.
Optimise operations
Use other batteries
Purchase a new battery
Publicidad
