Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT OVERVIEW
The multi-purpose wood table saw is a device for straight and angular sawing of wood and wood-based products. Thanks to the
fact that the saw is equipped with a base, it does not need to be attached to tables or work bases. As the proper use of the power
tool is a condition for the correct, reliable and safe operation of it, please
Read and keep the entire manual before the fi rst use of the tool.
The tool supplier shall not be liable for any damage resulting from failure to comply the safety instructions and recommendations
specifi ed in this manual.
ACCESSORIES
The product is delivered complete, but requires certain preliminary assembly actions described in further sections of the manual.
A cutting disc and base are supplied with the product.
SPECIFICATION
Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Electrical protection class
Operating mode*
Rated rotary speed
External diameter of the cutting disc
Internal diameter of the cutting disc
Minimum thickness of the cutting disc
Maximum thickness of the cutting disc
Riving knife thickness
Cutting thickness (90
O
)
Cutting thickness (45
)
O
Work table dimensions
Dust extraction outlet diameter
Weight
Ingress protection rating
Noise
- Sound Pressure L
± K
pA
- Acoustic Power L
± K
wA
* S1 - continuous operation, S6 25% - intermittent operation with idle intervals. Operation under load may last for 25% of a 10-min-
ute period (2.5 minutes) and the rest of operation should be performed in idle gear.
The declared noise emission value(s) have been measured in accordance with a standard test method and may be used for com-
paring one tool with another. The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING! The noise emissions during actual use of the power tool can diff er from the declared values depending on the ways in
which the tool is used especially what kind of workpiece is processed. There is a need to identify safety measures to protect the
operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating
cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
O R I G I N A L
EN
Units
[V~]
[Hz]
[W]
[min
-1
]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[kg]
[dB(A)]
[dB(A)]
I N S T R U C T I O N S
Value
YT-82165
220-240
50
2000
II
S1 1800 W
S6 25% 2000 W
5000
250
30
2.1
2.8
2
85
65
563 x 583
35
21
IPX0
94,0 ± 3,0
107,0 ± 3,0
17
Publicidad
