Waeco SinePower SP700 Instrucciones De Uso página 27

_MSK.book Seite 27 Montag, 26. Februar 2007 10:15 10
SinePower
5 Intended use
The wave inverter converts direct current of
12 V (MSK700-12, MSK1000-12, MSK1500-12, MSK2000-12,
MSK3000-12)
24 V (MSK700-24, MSK1000-24, MSK1500-24, MSK2000-24,
MSK3000-24)
into a 230 V alternating current of 50 Hz.
Warning
Never use the inverter on vehicles where the positive terminal of
the battery is connected to the chassis.
6 Technical description
The inverters can be operated wherever
a 12 V DC connection (MSK700-12, MSK1000-12, MSK1500-12,
MSK2000-12, MSK3000-12)
a 24 V DC connection (MSK700-24, MSK1000-24, MSK1500-24,
MSK2000-24, MSK3000-24)
is available. The light weight and compact construction of this device allow
for easy installation in mobile homes, commercial vehicles or motor and sail-
ing yachts.
The output voltage corresponds to the household voltage from the socket
(pure sine wave).
Please observe the values for constant output power and peak output power
as indicated in the "Technical data" chapter on page 38. Never connect
devices that have a higher power requirement.
Note
Note when connecting devices with an electrical drive (such as
power drills and refrigerators), that they often require more power
than is indicated on the type plate.
Intended use
27