Waeco SinePower SP700 Instrucciones De Uso página 28

_MSK.book Seite 28 Montag, 26. Februar 2007 10:15 10
Fitting the inverter
The inverter has various protective mechanisms:
High voltage shutdown: The inverter shuts itself off when the voltage
exceeds the cut-off value. It restarts when the voltage returns to the
restart value.
Low voltage shutdown: The inverter shuts itself off when the voltage
sinks below the cut-off value. It restarts when the voltage rises to the
restart value.
High temperature shutdown: The inverter switches off when the tem-
perature inside the device or the temperature on the cooling element
exceeds a cut-off value. It starts again when the temperature returns to
the restart value.
Note
The individual values are found in the "Technical data" chapter on
page 38.
The MSK2000-12/MSK2000-24 und MSK3000-12/MSK3000-24 inverters
have a 230 V AC socket and a terminal strip for a permanent connection.
The inverter can be switched into an energy saving mode so that the battery
connected to the inverter is not charged too quickly.
WAECO offers a remote control as an accessory for the inverter.
7 Fitting the inverter
7.1 Tools required
For installation and assembly you will require the following tools:
Pen for marking
Drill bit set
Drill
Screwdriver
28
SinePower