AEG IKE42640KB Manual De Instrucciones página 103

• Insert the next appliance into the worktop
cutout. Make sure that the front edges of
the appliances are on the same level.
• Fix appliances other than Teppan Yaki
with the use of snap-in springs.
• At the end, tighten the screws of the
Teppan Yaki.
4. PRODUCT DESCRIPTION
4.1 Cooking surface layout
2
4.2 Control panel layout
1 2 3
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which
functions operate.
1
1
4 5 6
12
• Use silicone to seal the gaps between the
appliances and those between the
appliances and the worktop.
• Press the rubber shape firmly against the
glass ceramic and move it slowly along
the edges to squeeze out excess silicone.
• Put some soapy water on the silicone and
smoothen out the edges with your finger.
• Do not touch the silicone until it hardens, it
can last for about a day.
• Carefully remove the silicone squeeze-out
with a shaving razor.
• Clean the glass surface.
Induction cooking surface
1
Control panel
2
7
11 10
8 9
ENGLISH 103