Epson FX-890 Manual Del Usuario página 29

1. Make sure the paper guide is in the upright position. Then set the
paper-thickness lever to 0 if you are using ordinary single-sheet
paper. (If you are using envelopes, see "Envelopes" on page 29 to set
the lever.)
Also move the paper release lever to the single-sheet
position.
2. Turn on the printer, if necessary.
3. Slide the left edge guide
until it locks in place next
to the triangle mark on the
paper guide. Next adjust
the right edge guide to
match the width of your
paper.
4. Insert a sheet of paper with
the printable side down
between the edge guides until
it meets resistance. The printer
feeds the paper automatically
and is ready to print.
If the first printed line on your page appears too high or low, you can use
the Micro Adjust function to adjust the top-of-form position. See page 32
for more information.
Paper Handling
27