Installing The Printer Software - Epson FX-890 Manual Del Usuario

Installing the Printer Software

After you connect the printer to your computer, you need to install the
EPSON printer software on the CD-ROM shipped with your printer. The
printer driver is the software that runs, or "drives," your printer. With it,
you can select printer settings such as print quality, resolution, and paper
size.
The software includes EPSON Status Monitor 3, which displays printer
status information and notifies you of printer errors. See the Reference
Guide for more information.
Note:
Installing the printer software may require administrator privileges. If you
have problems, ask your administrator for more information.
If the New Hardware Found screen or any other wizard appears when you
turn on your computer, click Cancel .
If the Digital Signature Not Found screen appears, click Yes . If you click
, you must reinstall the printer driver.
No
Follow these steps to install the software.
1. Make sure Windows is running and the printer is connected to your
computer but turned off.
2. Insert the printer software CD-ROM into the CD-ROM or DVD
drive, and follow the instructions on the screen.
3. When the installation is complete, see page 15 to install the
Reference Guide and the EPSON Remote Configuration Utility.
Setting Up the Printer
13