Avoid electrical outlets controlled by wall switches or automatic
timers. An interruption in power can erase information in the
memory of your printer or computer. Also avoid outlets on the same
circuit as large motors or other appliances that can cause voltage
fluctuations.
Use a grounded power outlet; do not use an adapter plug.
Assembling the Printer
1.
Make sure the printer is turned off and unplugged. Then open the
printer cover and pull it up to remove it.
2.
Remove the paper tension
unit by pressing up the
tabs on each side and
pulling it up.
3.
Use your hand to slide the
print head to the middle of
the printer.
Warning:
w
If you have just used the
printer, the print head
may be hot; let it cool
for a few minutes before
touching it.
8
Setting Up the Printer