Electrolux KEGB8520W Manual De Instrucciones página 18

Opening the door deactivates the remote
start. Refer to the information provided
further in this chapter.
How to deactivate the remote start
Press until the display shows 0h.
• The light related to the button is off.
• The appliance returns to the
programme selection.
10.3 How to select and start a
programme using MY TIME
selection bar
1. Slide your finger across MY TIME
selection bar to choose a suitable
programme.
• The light related to the selected
programme is on.
• The ECOMETER indicates the level of
energy and water consumption.
• The display shows the programme
duration.
2. Activate applicable EXTRAS if desired.
3. Close the appliance door to start the
programme.
10.4 How to select and start the
programme Pre-rinse
1. To select Pre-rinse, press and hold
for 3 seconds.
• The light related to the button is on.
• The ECOMETER is off.
• The display shows the programme
duration.
2. Close the appliance door to start the
programme.
10.5 How to activate EXTRAS
1. Select a programme using MY TIME
selection bar.
2. Press the button dedicated to the option
you want to activate.
• The light related to the button is on.
• The display shows the updated
programme duration.
18 ENGLISH
• ECOMETER indicates the updated
level of energy and water
consumption.
By default, options must be activated
every time before you start a programme.
It is not possible to activate or deactivate
options while a programme is running.
Not all options are compatible with each
other.
Activating options often increases the
water and energy consumption as well as
the programme duration.
10.6 How to start the AUTO Sense
program
1. Press .
• The light related to the button is on.
• The display shows the longest
possible program duration.
2. Close the appliance door to start the
program.
The appliance senses the type of load and
adjusts a suitable wash cycle. During the
cycle, the sensors operate several times and
the initial program duration can decrease.
10.7 How to delay the start of a
programme
1. Select a programme.
2. Double press
The display shows 1h.
3. Press repeatedly until the display
shows the desired delay time (from 1 to
24 hours).
4. Close the appliance door to start the
countdown.
When you set the delay start, the remote start
is automatically activated.
.