Publicidad
Idiomas disponibles
Idiomas disponibles
During the countdown, you cannot change
the programme selection. You can change
the delay time in the app.
When the countdown is complete, the
programme starts.
10.8 How to cancel the delay start
while the countdown operates
Press and hold
for about 3 seconds.
The appliance returns to the programme
selection.
If you cancel the delay start, you have to
select the programme again.
10.9 How to cancel a running
programme
Press and hold
for about 3 seconds.
The appliance returns to the programme
selection.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
10.10 Opening the door while the
appliance operates
Opening the door while a programme is
running pauses the wash cycle. The display
shows the remaining duration of the
programme. After closing the door, the wash
cycle resumes from the point of interruption.
Opening the door while the remote start is
activated deactivates this function. Activate
the remote start again before you close the
door; otherwise, the wash cycle starts
immediately after you close the door.
Opening the door does not deactivate the
remote start if the delay start is set.
11. HINTS AND TIPS
11.1 General
Follow the hints below to ensure optimal
cleaning and drying results in daily use and to
protect the environment.
If you open the door during the delay start
countdown, the countdown is paused. The
display shows the current countdown status.
After closing the door, the countdown
resumes.
Opening the door while the appliance
operates may affect the energy
consumption and the programme
duration.
If the door is opened for more than 30
seconds during the drying phase, the
running programme ends. It does not
happen if the door is opened by the
AirDry function.
10.11 The Auto Off function
This function saves energy by switching the
appliance off when it is not operating.
The function comes into operation
automatically:
• When the programme is completed.
• After 5 minutes if a programme was not
started.
10.12 End of the programme
When the programme is complete, the
display shows 0:00.
The Auto Off function switches the appliance
off automatically.
All buttons are inactive except for the on/off
button.
If the display shows upd, refer to
"Troubleshooting".
• Washing dishes in the dishwasher as
instructed in the user manual usually
consumes less water and energy than
washing dishes by hand.
ENGLISH
19
Publicidad
